Miris HMA™ Calibration Control Kit™ Miris Calibration Control Kit™ For daily validation of the internal calibration of the Miris Human Milk Analyzer™
Miris Calibration Control Kit consists of two different solutions: Miris Calibration Control 1 and Miris Calibration Control 2.These are standardized solutions with known concentrations of fat, protein and carbohydrates that correspond to those found in average human milk and the high end of the Miris Human Milk Analyzer™ measuring range.
Request a quote
Miris HMA™ Check solution™ Miris Check™ For zero setting the Miris Human Milk Analyzer™, and control that cleaning has been done successfully Application: Only for validation of the preset internal calibration of the Miris HMA™.
Storage: Store the concentrate dark, at room temperature (20-30°C, 68-86°F), sealed in container in which it is supplied. Store the diluted solution in glass or plastic containers, out of direct sunlight. Keep away from foodstuff and animal feed.
Instructions: Dilute 10 ml concentrate (1 tube) with 90 ml distilled or deionized water and mix. Warm to 40°C (104°F) before use. The estimated time for preparation is 15 minutes for mixing the ingredients and to warm the solution to 40°C (104°F). The solution is to be used when preparing the instrument for analysis and also after cleaning if analysis is continued.
Miris HMA™ Cleaning solution™ Miris Cleaner™ A cleaning solution for the Miris Human Milk Analyzer™
Application: Only for cleaning of the Miris HMA™ cuvette and surface of the instrument. For in vitro diagnostic use.
Storage: Store the concentrate dark, at room temperature (20-30°C), sealed in the contain- er in which it is supplied. Store the diluted solution in glass or plastic containers, out of direct sunlight. Keep away from foodstuff and animal feed.
Instructions: Dilute 50 ml concentrate (1 tube) with 950 ml distilled or deionized water and mix. Warm to 40° C before use and follow the instructions in Chapter 3.
Miris HMA™ Sample filling Syringe 5ml
주사기는 우유 셈플과 용액을 Miris HMA® 에 주입하는데 사용됩니다
Miris HMA™ Sample Tube 25 ml-
Miris 초음파 프로세스와 함께 제공되는 투브 홀더에 맞는 나사 뚜껑 투브가 있는 독립형 10ml 튜브입니다, 이튜브는 우유분석 전반에 걸처 보관,온난화 및 균질화에 사용 될 수 있습니다.
Miris HMA™ Sample Tube 10 ml
Miris 초음파 프로세스와 함께 제공되는 튜브 홀더에 맞는 5ml 튜브입니다,, 이튜브는 우유 분석 공정 전반에 걸처 보관,온난화 및 균질화에 사용될 수 있습니다.