♦Elecstrochemistry Meter
♦HYDROCHECK® HC1000
♦다중 파라미트 전기 화학 측정기
#수질다항목 측정기 #수질다항목분석기,
현장에서 분석할 때 전문 수질 엔지니어는 가장 극단적인 환경을 처리할 수 있을 만큼 견고한 분석기를 요구하며, 한 손으로 휴대할 수 있을 만큼 컴팩트하면서도 현장에서 실험실 품질의 결과를 제공할 수 있을 만큼 강력합니다.
Trace2o®는 전기화학 분석기의 하이드로체크 범위를 제공합니다. 각 센서는 pH, EC 및 DO 전극을 위한 기능과 광범위한 ISE 및 광학 센서를 갖춘 완전 방수 하우징 및 산업 품질의 센서를 제공합니다.
HydroTest 범위의 수질 테스트 키트를 통해 Trace2o® 는 현장 및 실험실 수질 분석을 위한 다양한 강력한 솔루션을 제공합니다.
HydroTest 제품군에는 강력한 다중 파라미터 광미터뿐만 아니라 모바일 실험실을 포함한 현장 및 실험실 응용 분야에 적합한 소형 분광광계가 포함됩니다.
더 작고 가벼운 단일 파라미터 광미터는 주요 매개 변수에 대한 수질 모니터링에 대한 저비용 솔루션을 제공합니다.
이 제품군에는 소형 IR 탁도 측정기와 다른 HydroTest 계측기와 완벽하게 호환되는 강력한 열반응기를 통합한 매우 정확한 COD 시스템이 포함되어 있습니다.
제조사 : Trace2o 영국 http://www.trace2o.com
국내 공급사 : GenureTech http://www.gttox.com
pH, 온도, 전기 전도도, 용존 산소, 총 용존 고형, 염도 및 산화/감소 잠재력을 빠르고 정확하게 측정할 수 있는 휴대용 견고한 IP67 다중 파라미터 전기 화학 기기입니다. 방수(IP67) 하우징은 인체공학적으로 설계되었으며 현장 용으로 견고하며, 산성 내성 인클로저와 견고한 보호형 LCD 디스플레이 스크린을 갖추고 있습니다. 방수 커넥터가 장착된 개별 산업용 수중 잠수정 센서는 멀티 센서 손드 하우징에 쉽게 장착할 수 있습니다.
취급의. 하우징에는 표준으로 3미터 케이블이 포함되어 있으며, 선택적으로 15미터까지 확장가능합니다. 전체 솔루션은 미터, 전극, 액세서리 및 교정 솔루션을 포함하는 방수 캐리 케이스는 휴대용 전기 화학 적 수질 모니터링을위한 완전한 현장 준비 키트를 제공합니다
A portable, rugged IP67 multi-parameter electrochemical instrument for fast, accurate determination of pH, temperature, electrical conductivity, dissolved oxygen, total dissolved solids, salinity, and oxidation/reduction potential. The waterproof (IP67) housing is ergonomically designed and ruggedised for field use, with an acid-resistant enclosure and a rigid, protected LCD display screen. The individual industrial-quality submersible sensors, with waterproof connectors, are mountable in multi-sensor sonde housing for ease of handling. The housing includes a 3 metre cable as standard, optionally extendable to 15 metres. The entire solution is housed in a waterproof carry case, inclusive of meter, electrodes, accessories and calibration solutions, offering a fully field-ready kit for portable electrochemical water quality monitoring.
Features & benefits of HC1000
User Interface Backlit multi-function LCD display 60 x 60mm. 4SF digits on all parameters. Touch sensitive keypad with audible feedback
Operation Temperature compensation: 0 – 100°C, 32 – 212°F, automatic or manual Stability condition: High (HI) or Low (LO), selectable Calibration due reminder: 1 to 30 days, selectable Auto-hold function Auto-off function: 10, 20, 30 minutes after last key pressed Electrode diagnosis: Slope, offset Output: USB Communication Interface
Environmental Operating temperature: 5 – 40°C Storage temperature: 0 – 70°C Humidity: 30 – 90% (Non-condensing) Chemically-resistant housing
Power Supply 3 x AAA/LR03 Alkaline cells, provides 26 hours operation, > 3000 tests USB power supply option (non-recharging)
Data 500 data sets with date/time stamp
Approvals CE conformity; IP67 water resistance
Dimensions TBA
Weight TBA
Parameters
pH
Range
-2.000 – 20.000
Resolution
0.1, 0.01, 0.001, selectable
Accuracy
± 0.002
Calibration points
1 to 5 points
pH buffer groups
USA, NIST, DIN, user-defined
ORP
0 – ± 1999.9 mV
1 or 0.1 mV, selectable
± 0.2 mV
1 point
Measurement Modes
Absolute or relative mV
Conductivity
0 – 200 mS/cm
1, 0.1, 0.01
± 0.5% F.S
Up to 5 points
Calibration Solutions
10 μS, 84 μS, 1413 μS, 12.88 mS, 111.8 mS
Cell Constant
0.1, 1, 10, user-defined
Temperature Coefficient
0.0 – 10.0% per °C, linear or deionised water
Normalisation Temperature
20 or 25°C, selectable
TDS
0 – 10 ppt (Max. 20 ppt)
± 1% F.S
TDS Conversion Factor
0.40 – 1.00
Salinity
0 – 80 ppt or psu
Practical Salinity or Seawater Standards
Resistivity
0 – 100 MΩ
Dissolved Oxygen
0.00 – 20.00 mg/L or ppm
± 0.2 mg/L or ppm
% Saturation of Oxygen
0.0 – 200.0%
± 2.0%
Barometric Pressure
450 – 850 mmHg
Salinity Correction
0 – 50 g/L