휴대용 수질다항목측정기 HydroTest® HT1000

unnamed

PHYSICO-CHEMICAL ANALYSIS

#휴대용 수질다항목측정기-측광계

#휴대용분광광도계 . #휴대용-측광광도계

#수질측정기 #수질다항목분석기 #휴대용수질측정기

물리화학 분석

현장에서 분석할 때 전문 수질 엔지니어는 가장 극단적인 환경을 처리할 수 있을 만큼 견고한 분석기를 요구하며, 한 손으로 휴대할 수 있을 만큼 컴팩트하면서도 현장에서 실험실 품질의 결과를 제공할 수 있을 만큼 강력합니다.

Trace2o®는 전기화학 분석기의 하이드로체크 범위를 제공합니다. 각 센서는 pH, EC 및 DO 전극을 위한 기능과 광범위한 ISE 및 광학 센서를 갖춘 완전 방수 하우징 및 산업 품질의 센서를 제공합니다.

HydroTest® 범위의 수질 테스트 키트를 통해 Trace2o® 는 현장 및 실험실 수질 분석을 위한 다양한 강력한 솔루션을 제공합니다. HydroTest® 제품군에는 강력한 다중 파라미터 광미터뿐만 아니라 모바일 실험실을 포함한 현장 및 실험실 응용 분야에 적합한 소형 분광광계가 포함됩니다.

더 작고 가벼운 단일 파라미터 광미터는 주요 매개 변수에 대한 수질 모니터링에 대한 저비용 솔루션을 제공합니다. 이 제품군에는 소형 IR 탁도 측정기와 다른 HydroTest® 계측기와 완벽하게 호환되는 강력한 열반응기를 통합한 매우 정확한 COD 시스템이 포함되어 있습니다.

제조사 : Trace2o.Ltd  In U.K  www.trace2o.com

Portable multi-parameter photometer for chemical testing
HydroTest® HT1000

현장서 바로분석

수로(물)하천수,호소수,자연수,강물,하천수,산업체방류수,지하수,광산폐수,공업용수,농업용수,수경재배수,등

전처리 필요없이 현장 물(수로)바로분석 가능
탁월한 재현성. 정밀도: ±5% 이내,
경제성   정확성   안정성   편의성

HydroTest® 소개
HydroTest® HT1000 Photometer 는 현대적인 인체 공학 설계를 신뢰할 수 있는 실험실 품질의 광학을 결합한 것으로 완전한 수질 시험 해결책을 위해 부속품 및 시약과 함께 휴대용 방수 케이스에 통합되어 있습니다.

인체공학적 설계는 손바닥이나 평평한 표면위에서 똑같이 안정적입니다. 배면조명의 선명한 디스플레이는 모든 조명 조건에서 편안하게 조작할 수 있도록 해 줍니다. 간단한 시험 방법, 직관적인 제어 시스템과 종합적인 사용설명서는 모든 재능의 오퍼레이터에게 이상적으로 적합니다.

정밀 광학이 매우 신뢰할 수 있는 결과를 얻기 위해 장수명 LED를 간섭 필터 및 매우 정확한 사진 센서와 결합합니다. N.I.S.T 추적 가능한 고정 능력과 검증 표준은 지속적인 유효성과 신뢰성을 보증합니다.

가장 중요한 수질 모든 파라미터를 포함하여 120가지 이상의 시험방법이 활용가능하며, 시험방법은 사용자가 쉽게 업데이트 할 수 있습니다.
데이터는 장치에 직접 (1000 자료 세트까지) 저장 할 수 있으며 또한 무선으로 PC나 프린터에 전송할 수 있습니다.

견고한 IP68등급의 방수 인클로저는 모든 기후 조건에서도 작동할 수 있도록 거친 환경을 위해 만들어졌습니다.
본 방수 껍질이 단단한 휴대 케이스는 탄성이 있지만 가볍고 환경 모니터링을 위한 완전한 휴대용 해결책을 제공합니다.

특징 및 장점,강점,
크롬-Chromium Cr(6), 공단방류수, 하천수, 지표수, 호소수,자연수, 강물등에서 전처리 필요없이 최저감도 20ppb-2000ppb ( 0.02-2mg/L)단일스탶  측정 범위로 탁월한 재현성,정밀성이  2019년도 부터  국내 시장 판매 보급하여 수요자 연구원님들로부터 호평을 받고있습니다, 

HydroTest HT1000

The HydroTest HT1000 Photometer combines a modern, ergonomic design, with reliable, laboratory-quality optics, incorporated into a waterproof carry case with accessories and reagents, for a complete environmental water testing solution. The ergonomic design is equally stable in the palm of the hand, or on a flat surface. The backlit high-contrast display enables comfortable operation in all lighting conditions. The simple test methods, intuitive control system and comprehensive manual are ideally suited for operators of all abilities. Precision optics combine long-life LEDs with interference filters and a highly accurate photo sensor for highly reliable results. N.I.S.T.-traceable calibration capability and verification standards assure continued validity and reliability. Over 120 test methods are available, including all of the most important water quality parameters, and methods can be easily updated by users. Data can be stored directly on the unit (up to 1000 data sets), or wirelessly transmitted to PC or printer. The robust IP68-rated waterproof enclosure is built for tough environments, allowing operation in all weather conditions. The waterproof hard-shell carry-case is resiliant yet lightweight, offering a complete portable solution for environmental monitoring.

User Interface
Backlit LCD graphics display, 128 x 64 pixels
Touch-sensitive keypad with audible feedback

Operation
Analytical principle: Fixed wavelength visible absorption photometer
Wavelength accuracy: ± 1 nm
Wavelengths: 430, 530, 560, 580, 610, 660 nm
Accuracy: 2% FS @ 20 – 25°C
Resolutions: 0.005Abs
Power supply: 4 x AA/LR6 alkaline cells, provides 26 hours operation, > 3000 tests

Environmental
Operating temperature: 5 – 40°C
Storage temperature: 0 – 70°C
Humidity: 30 – 90% (Non-condensing)
Chemically-resistant housing

Languages
English; French; Spanish; Portuguese; Indonesian
Additional languages available on request

Data
1000 data sets
Data download via IR link (required T2o PC-Link module)

Approvals
CE conformity; IP68 water resistance

Dimensions
TBA

Weight
TBA

HT1000+Parameters 를 아래분석 원소만 선정하시면 최대한 경제적입니다

Parameters and ranges

Alkalinity-M 5 – 500 mg/L CaCO3
Alkalinity-P 5 – 300 mg/L CaCO3
Aluminium 0.01 – 0.3 mg/L Al
Ammonia 0.02 – 1 mg/L N
Boron 0.1 – 2 mg/L B
Bromine 0.05 – 13 mg/L Br
Chloride 0.5 – 25 mg/L Cl-
Chlorine 0.01 – 10 mg/L Cl2
Chlorine Dioxide 0.02 – 11 mg/L ClO2
Chromium 0.02 – 2 mg/L Cr
COD 0 – 15000 mg/L O2
Copper 0.05 – 5 mg/L Cu
Copper, free 0.05 – 5 mg/L Cu
Cyanide 0.01 – 0.5 mg/L CN
Cyanuric acid 0 – 160 mg/l Cys
Fluoride 0.05 – 2 mg/l F
Hardness, calcium 0 – 900 mg/l CaCO3
Hardness, total 2 – 500 mg/L CaCO3
Hazen 0 – 500 mg/L Pt-Co-units
Hydrazine 0.05 – 0.5 mg/L N2H4
Hydrogen Peroxide 0.03 – 3 mg/L H2O2
Iodine 0.05 – 3.6 mg/L I
Iron (Fe2+, Fe3+, soluble) 0.02 – 3 mg/L Fe
Manganese 0.2 – 4 mg/L Mn
Molybdenate/Molybdenum 1 – 50 mg/L MoO4
Monochloramine 0.04 – 4.5 mg/L Cl2
Nickel 0.1 – 10 mg/L Ni
Nitrate 0.08 – 1 mg/L N
Nitrite 0.01 – 0.5 mg/L N
Oxygen, active 0.1 – 10 mg/L O2
Ozone 0.02 – 2 mg/L O3
pH-value 5.2 – 9.6 pH
Phosphate 0.02 – 100 mg/L PO4
Potassium 0.7 – 12 mg/L K
Silica 0.05 – 90 mg/L SiO2
Sodium hypochlorite 0.2 – 16 % NaOCl
Sulfate 5 – 100 mg/L SO4
Sulfide 0.04 – 0.5 mg/L S
Sulfite 0.1 – 5 mg/L SO3
Suspended Solids 5 – 750 mg/L
Turbidity (attenuated radiation method) 0 – 1000 NTU
Urea 0.1 – 2.5 mg/L CH4N2O
Zinc 0.02 – 1 mg/L Zn

 

wagtech-water-catalogue (5)

20200220_110112

20200220_105628

HydroTest20HT100020Image208_edited

bf71bd_217bfb2dee5c4e268d37e8d0e36bd740 (1)

wagtech-water-catalogue-2 (2)

 

 

 

현재 제품개발중임↓

image005

HydroTest® Spectrophotometer HT3000_Pro Portable
Multi-Parameter

HydroTest Pro Portable Spectrophotometer HT3000

The HydroTest Pro HT3000 is a modern, portable single-beam spectrophotometer that has been specifically designed for water testing. The powerful yet cost-effective instrument is housed in a waterproof carry case, with battery power supply (mains optional), offering a truly portable spectrophotometer, optimised for field applications. Spectral data is displayed on the screen graphically, as well as a list of maximum and minimum absorption levels. The single beam spectral photometer has no need for a warm-up period, speeding up obtaining results on site. The automatic self-test and wavelength adjustment system ensures accuracy throughout the lifetime of the halogen lamp. The spectrophotometer can also be tested using a NIST-traceable secondary standard filter set.

Features & benefits of HT3000

Feature
Compatible with full range of tablet reagents, liquid reagents, powder reagents and tube tests
Multi-functional sample chamber
Compact battery power supply
Laboratory-quality user interface with data manipulation
Self-test functionality and user-friendly maintenance

Benefit
Suitable for a full range of field and laboratory photometric tests, including over 120 different parameters, with a full suite of reagents available
Capacity for a range of sample cells, including round 24mm and 16mm diameter cells, as well as rectangular 10-50mm cells, offering a range of path length capabilities for optimised analysis
Offers a flexible power solution such
A genuine replacement for a full-sized benchtop spectrophotometer in the laboratory setting, that can be easily transported to the field for maximum flexibility
Minimal failure modes and ease of maintenance reduce equipment downtime, limit maintenance costs and ensure continued accuracy of results

Wavelength range 330 to 900 nm
Photometric range 0.3 to 2.5 Abs
Spectral bandwidth 10 nm
Wavelength accuracy ±2 nm
Wavelength reproducibility ±1 nm
Light source Pre-adjusted tungsten halogen lamp
Monochromator Holographic grating
Detector Silicon photodiode
Sample chamber Multifunctional – Round vials 24 and 16 mm Ø, Rectangular cells 10-50 mm
Display Backlit LCD graphics display
Languages English; French; Spanish; Portugese
Storage capacity 1000 data sets
Interface Serial RS232
Dimensions 270 x 275 x 150 mm (instrument only)
Weight 3.2 Kg (instrument only)
Power supply Input: 100 – 240 V AC, 1.0 A 50 – 60 Hz Output: 12 V, 30 W
Approvals CE-Conformity

 

hero-yates

 

 

 

 

 

 

 


관련상품